Rock Type Dumper

Rock Type Dumper Technical Specifications:

DIMENSIONS: Dumpers used for rock and stone transportation. Width 2550 mm, length 6700 mm – 8000 mm.

SIDE WALLS : 160-180 cm high, made of Al quality sheet metal, hooks are made flat and side wall thickness varies between 5 and 10 mm.

REAR COVER: Can be made mechanical and optionally fully automatic.

TIPPER BASE FRAME: It is made of 160 NPU and double closure. Base gratings are assembled with automatic gas metal arc welding machines using 😯 NPI in dense or sparse form upon request. The base sheet is 4-5 mm thick and if desired, the resistance time can be increased with Hardo./400 steel sheet.

REAR AXIS SHAFT: 0100 mm and St 60 quality, bushings are bronze plated.

TELESCOPIC CYLINDER AND HYDRAULIC COMPONENTS: Specifications and number of telescopic hydraulic lifts: It is determined in the most appropriate way based on the length and working conditions of the tipper. Heavy duty brand cylinders of our own production are installed. Damper Pneumatically Operated, double speed lowering valve. Damper gearbox and pump are coupled type with limit control safety valve. The air and hydraulic hoses and fittings used comply with EU standards.

USED SHEET METAL : It is completely Ereğli Demir Çelik product and has St37 and St52 quality.

PAINT: After all surfaces are completely deburred and cleaned with chemical liquids, two coats of paint are applied on epoxy primer.

CHASSIS The chassis is made of high-strength steel with “I” cross-section and the strength is ensured by automatic gas metal arc welding machines, taking into account the difficult terrain conditions and overload.

AIR SUSPENSION: Height adjustment system with lowering and lifting. Supported by Z truss and suspension bellows.

FRONT AXLE LIFT: Front axle lifting and lowering system located inside the cabin.

TIRE 6+1 tubeless tires in 385/65 R22.5 size.

FOOT Double-speed mechanical leg with a carrying capacity of 24 tons each.

BRAKE The brake components used are in EU Standards and designed from WABC0 brand products.

AIR HARDWARE: The air required for air suspension, front axle lift, brake circuit and ABS circuit is used from the air tank. The hoses used in this installation are polyamide and resistant to air pressure.

KING-PIN 2″ SAE/DIN compliant KingPin made of high strength forged steel.

STANDARD ACCESSORIES 1- Single spare wheel place 2-1 tool locker 3- 1 bicycle railing 4- 1 chock and chock place 5-CRNi 1 coated 30 liter water tank

OPTIONS: 1- Rear axle lift 2- Fire extinguisher cabinet 3- Double spare wheel space 4- Separate fender for each tire 5- Lifting bumper 6- Front axle lift brake system

Rock Type Dumper Technical Drawing: