Pool Dumper

Pool Dumper Technical Specifications:

DIMENSIONS: Frame Length; It is made in different sizes depending on the chassis length and request. Width 2550 mm, length 6700 mm – 8000 mm.

PNEUMATIC SYSTEM: In the pneumatic installation of the trailer, the air supply time, which causes loss of time and fuel before the road, has been minimized by using the polyemid hose, which is not affected by climatic conditions, and the records that will prevent energy leakage in the pneumatic installation of the trailer.

FEET Double speed 25 tons moving and 50 tons stationary load capacity legs are used.

TIPPER BASE FRAME: It is made of 160 NPU and double closure. Base gratings are assembled with automatic gas metal arc welding machines using 😯 NPI in dense or sparse form upon request. The base sheet is 4-5 mm thick and if desired, the resistance time can be increased with Hardo./400 steel sheet.

REAR AXIS SHAFT: 0100 mm and St 60 quality, bushings are bronze plated.

TELESCOPIC CYLINDER AND HYDRAULIC COMPONENTS: Specifications and number of telescopic hydraulic lifts: It is determined in the most appropriate way based on the length and working conditions of the tipper. Heavy duty brand cylinders of our own production are installed. Damper Pneumatically Operated, double speed lowering valve. Damper gearbox and pump are coupled type with limit control safety valve. The air and hydraulic hoses and fittings used comply with EU standards.

USED SHEET METAL : It is completely Ereğli Demir Çelik product and has St37 and St52 quality.

PAINT: After all surfaces are completely deburred and cleaned with chemical liquids, two coats of paint are applied on epoxy primer.

CHASSIS The chassis is made of high-strength steel with “I” cross-section and the strength is ensured by automatic gas metal arc welding machines, taking into account the difficult terrain conditions and overload.

AIR SUSPENSION: In the air suspension system designed by prioritizing travel comfort and safety; Trailer arm for manual height adjustment, level valve for automatic height adjustment, shock absorbers to take trailer oscillation amplitudes and parabolic Z scissors are used in the opposite sides of the air bellows.

FRONT AXLE LIFT: In the front axle lift system, which can be controlled from the tractor with a folded bellows from the axle holders, the WABCO brand axle lift valve, which includes all of these, is used instead of the 3-2 valves and separate electric coil used in the past.

TIRE 6+1 tubeless tires in 385/65 R22.5 size.

BRAKE The brake components used are in EU Standards and designed from WABC0 brand products.

AIR HARDWARE: The air required for air suspension, front axle lift, brake circuit and ABS circuit is used from the air tank. The hoses used in this installation are polyamide and resistant to air pressure.

KING-PIN 2″ SAE/DIN compliant KingPin made of high strength forged steel.

STANDARD ACCESSORIES 1- Single spare wheel place 2-1 tool locker 3- 1 bicycle railing 4- 1 chock and chock place 5-CRNi 1 coated 30 liter water tank

OPTIONS: 1- Rear axle lift 2- Fire extinguisher cabinet 3- Double spare wheel space 4- Separate fender for each tire 5- Lifting bumper 6- Front axle lift brake system

Pool Dumper Technical Drawing: